Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
How to Use Instructions
How to Press our DTF Transfers
- Pre-press material for 5 seconds to remove moisture and wrinkles from garment.
- Align transfer where you want it.
- Press with heavy even pressure for 7-10 seconds (Cotton 305 F / Poly 275 F).
- Peel HOT in a fast smooth motion.
- Second press recommended. Cover the design with a piece of newsprint, butcher, or kraft paper press again for 5 seconds. We advise against using teflon if you want that soft hand matte feel.
- Perfect DTF transfers every time.
*To avoid Dye Migration please adjust press to lower temp for 100% poly fabrics to only 275 degrees F.
🛒 Ready to order? Upload Your DTF Gang Sheet or shop our full DTF Transfer collection.
How to Press our GLITTER DTF Transfers
- Pre Press Garment for 5 seconds to remove moisture.
- Align Transfer.
- 305 Degrees for 10-15 seconds.
- Wait to Cool Completely.
- COLD PEEL.
- Repress with parchment/butcher paper for 5-10 seconds.
Enjoy the Sparkle!
✨ Create your Glitter DTF gang sheet: Glitter DTF - Create A Gang Sheet.
How to Press our GLOW DTF Transfers
- Glow in dark film works best with design with ALL WHITE INK (only white ink will glow)
Pre Press Garment for 5 seconds to remove moisture. - Align Transfer.
- 330 Degrees for 8-10 seconds.
- Wait to Cool Completely.
- COLD PEEL.
- Repress with parchment/butcher paper for 5 seconds.
🌙 Order Glow in the Dark transfers: Glow in Dark DTF - Create A Gang Sheet.
How to Press our Iridescent DTF Transfers
- Pre Press Garment for 5 seconds to remove moisture.
- Align Transfer.
- 330 Degrees for 8-10 seconds.
- Wait to Cool Completely.
- COLD PEEL.
- Repress with parchment/butcher paper for 5 seconds.
🌈 Order Iridescent transfers: Iridescent DTF - Create A Gang Sheet.
How to Press our METALLIC DTF Transfers
- Silver Metallic: Use ALL WHITE INK
- Gold Metallic: Use ALL YELLOW OR ORANGE INK
- Pre Press Garment for 5 seconds to remove moisture.
- Align Transfer.
- 330 Degrees for 8-10 seconds.
- Wait to Cool Completely.
- COLD PEEL.
- Repress with parchment/butcher paper for 5 seconds.
âš¡ Order Metallic DTF transfers: Gold Metallic or Silver Metallic gang sheets.
How to Use our UVDTF Transfers
- Clean surface thoroughly.
- Slowly peel back layer of design off carefully.
- Position decal and gently apply.
- Once applied, use a squeegee to apply firm pressure and remove air bubbles.
- Gently peel away clear top layer.
** Cannot be repositioned once applied!***
Hand Wash Only
💧 Ready to create UV DTF decals? UV DTF - Create your Gang Sheet.
How to Use our Sublimation Transfers
- Must Use 65% polyester or more
- Light Color Garments/Cups Only
- Can be used on fabrics and hard surfaces where high heat can be applied.
- Press at 390-400 degrees F
- 50-60 seconds
- Medium Pressure
🎨 Order custom sublimation transfers: Sublimation Transfers - Upload Your Sheet.
Shop All Specialty Transfers →
Invalid password
Enter